Stack-on Gladiator CADE Manuel d'utilisateur télécharger pdf (Page 4)

Locate the cabinet in the desired

location.

Make sure the cabinet is level and

square by rotating down only the

levelers required.

To reposition the top or bottom shelf, first

remove the retaining plugs.

Remove the shelf by placing 2 hands

underneath the shelf and lifting with even

pressure.

Move the shelf to the desired location

making sure all the tabs pass completely

through the shelf locating slots.

Storage Cabinet

INSTRUCTIONS

CADET-7203

Assemble leveler plates to bottom of

cabinet. Assemble levelers by

screwing them completely into the

holes in the plates.

Drawer Removal and General Maintenance

To Remove a Drawer

1. Pull the drawer all the way open then push it back to align tab with the opening

in the drawer channel.

Push the tab in with a screwdriver as shown until tab clears the stop on the

drawer channel.

Repeat on other side and remove drawer.

To reinstall the drawer, pry out the tab (apprx. ¼" (6mm)) and slide drawer

channels back into drawer channels. Firmly push drawer until it reaches the

closed position.

Maintenance

Drawer Slides should be lubricated periodically. Any good quality

household type lubricant can be used. Hardware (nuts, bolts,

screws) should be tightened periodically to maintain trouble free

operation.

40192-1004

TRIM INSTALLATION

Maximum Weight Limits

Shelves: 125 lbs. (56 KG) each

Cabinet: 500 lbs. (225 KG) total

WARNING

Excessive Weight Hazard

Use two or more people to

move and assemble cabinet.

Failure to do so can result in

back or other injury.

1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Stack-on Gladiator CADE Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Meubles Stack-on Gladiator CADE